MLC offers multidisciplinary safety studies across fire, electrical, civil, chemical and process safety, plus the wider workplace and emergency reviews below. Every study is scoped around your facility and operations, and reported with findings and recommendations your teams, authorities and insurers can act on. The current portfolio is listed below.
Fire Safety
- Fire & Gas Detection Mapping Study
- Design Adequacy of Fire Protection System
- Fire Load Calculations
- Fire Risk Assessment / Fire Safety Audit
Electrical Safety
- Arc Flash Study
- Lightning Risk Assessment and Design of Lightning Protection System
- Electrical Safety Audit
- E HAZOP
- Inspection of Flameproof Electrical Equipment’s
- Static Electricity Study
- Energy Conservation Audit
- Electrical Thermography
- Harmonic study
- Power Quality Analysis
- Energy Audit
- Power Audit
- Transients Audit
- Load Flow Analysis
- Flicker Study
- UPS &Generator Study
- Earthing Audit and Insulation Resistance Measurement
Civil Safety
- Building Structural Stability Study
- Building Risk Assessment – using Non-Destructive Testing
- Project Risk Assessment
- Construction Site Safety Audit
Chemical Safety
- Chemical Compatibility Study
- Personal Exposure Study
- Workplace Monitoring Study
- VOC Study
- Chemical Exposure Monitoring Study (IDLH, STEL, TLV)
- Dust Explosion Study
- Dispersion Modeling (Flare, SRV, Dump tanks, Scrubbing Vent Hazards)
- Minimum Ignition Energy Study
- Minimum Ignition Temperature Study
- Bulk Chemical Storage Risk Assessment
Process Safety
- PHSER Study
- PSM Gap Analysis
- Process Safety Management (PSM) Implementation
- Quantitative Risk Assessment (QRA)
- Safety Integrity Level (SIL) Study
- LOPA
- Functional Safety
- Hazard Identification and Risk Assessment (HIRA)
- HARA
- HAZID Study
- Hazard & Operability Study (HAZOP)
- Process Hazard Analysis (PHA Study)
- Job Safety Analysis
Others
- Pre-Startup Review
- Business Process Reengineering
- Business Continuity Plan
- Thermovision scanning in Cold Storage,
- Thermovision scanning in Pharmaceutics
- Medical Thermography
- Thermovision Scanning in Transmission lines
- Thermovision Scanning in Cement Boilers, refinery
- Thermography in Paper, Pulp, Printing, Packing
- Thermography in Hotel, food, beverage, Polymer, fiber, Glass, Milk dairy, Textile
- Building Thermography
- Mechanical Thermography
- Human Factor Engineering
- Ergonomic Studies
- Preparation or Vetting of On-Site Emergency Plan
- Preparation or Vetting of Off-Site Emergency Plan
- Pre-Occupancy Audit
- Behavior Based Safety / Safety Culture Survey
- Security Vulnerability Assessment (Security Audit)
- Machinery Risk Assessment
- Logistics Risk Assessment (inside or outside the plant truck movement)
FAQ
What kinds of safety studies does MLC offer?
Studies across fire, electrical, civil, chemical and process safety, plus emergency planning, behaviour-based safety and security assessments.
Which process safety studies are included?
PSM gap analysis and implementation, QRA, SIL/LOPA, HIRA/HAZID, HAZOP, pre-startup reviews, process hazard analysis and job safety analysis.
What electrical safety studies are available?
Arc flash studies, lightning risk assessment, hazardous area classification, electrical safety audits, thermography, power quality and harmonic studies, and earthing audits.
Can MLC prepare emergency plans?
Yes. MLC prepares or vets on-site and off-site emergency plans.
Does MLC work with insurers?
Yes. MLC carries out inspections on behalf of insurance and brokerage firms, including probable maximum loss (PML) studies.
Multidisciplinary studies across fire, electrical, civil, chemical and process safety.