Ignite Your Safety with Cutting-Edge Fire Detection Solutions for a Healthier Environment!
CO2 Fire Suppression System
TDK Tubing Suppression
Advance Fire Extinguishing solutions
Kitchen - Wet Chemical Based:
When a fire occurs, the point on the pressurized FDT nearest the heat source will burst at 175 deg C. The sudden tube depressurization actuates the special pressure differential valve and instantly floods the cooking area with Class F extinguishing agent. The fire is quickly suppressed just moments after it began...
(NOVEC -1230 / FK 5-1-12)
When the automatic detection system is triggered by the heat of the flames, the Novec 1230 fire protection fluid (also known as FK 5-1-12) in the fire suppression system is designed to quickly discharge and reach the right amount needed to put out the fire within 10 seconds..
What is FK-5-1-12 extinguishing agent?
FK-5-1-12 is an environmentally sustainable clean extinguishing agent that has undergone considerable testing to determine its fire performance characteristics as a clean extinguishing agent.
Advantage:
- → Very swift fire suppression. Reach extinguishing level ≤10s.
- → Safe to people. People are safe when exposed to the FK-5-1-12/Novec 1230 gas discharge level.
- → Low extinguishing concentration. Nearly no obscurity to vision during person evacuation.
- → Easy to clean. No residue left, and minimizes damage to sensitive equipment.
- → Environmentally friendly. Zero ozone depletion potential and zero global warming potential.
- → Simple installation, with small storage space.
FM-200:
FM-200™, also commonly known as HFC-227ea, is a clean agent fire suppressant for Class A, B, and C fires and meets NFPA Standard 2001 Clean Agent Fire Extinguishing Systems. Clean agents are fast and effective in suppressing fires, are safe in occupied spaces, and do not leave a residue.
How Does FM-200™ Work
FM-200™ suppresses fire by disrupting the fire triangle. The fire triangle is made up of heat, oxygen, and a fuel source, and by removing one of these elements, the fire is extinguished. FM-200™ removes the heat or free radicals, which interferes with the fire triangle's chemical reaction to extinguish the fire. Clean agent fire suppression systems, like ones using FM-200™, can achieve fire extinguishing concentrations in 10 seconds or less.
Advantage:
FM-200™ is a clean agent that is safe around people; therefore, FM-200™ fire suppression systems are safe to install in occupied spaces.
When an FM-200™ fire suppression system activates to put out a fire, no residue is left behind, and it is safe for equipment, electronics, and machinery.
Compared to other clean agents like 3M™ Novec™ 1230 Fire Protection Fluid, FM-200™ is a slightly more cost-effective option. Because of the small amount of FM-200™ required to suppress a fire, smaller or fewer cylinders are needed when compared to other agents like 3M Novec 1230 fluid.
Automatic Fire Suppression System for Vehicles
Yes, it’s quite possible that vehicle fires can occur at any time, even when the vehicle is not in use. In this case, the vehicle fire suppression system detects a fire automatically and suppresses it in minutes. This early detection is vital not only for the safety of the driver but also for the longevity of your business and the protection of other vehicles. MLC fire suppression systems are designed to warn the operator, and at the same time, suppress the fire, protecting both vehicles and drivers. The automatic fire suppression systems suppress the fire in its earliest stages before it fully spreads into highly combustible areas, and for this reason, the damage is limited, and equipment downtime is held to a minimum.
The automatic fire suppression system is a reliable yet effective firefighting system ideally used to extinguish vehicle fires. This type of fire suppression system is designed with detection wires wrapped around the perimeter of the vehicle’s engine. Now a question arises, how it works? When the insulation on one wire melts at the case of reaching a temperature of 356℉ or higher, the melted wire touches the other wire, and a message is sent to the control panel to dump the system and extinguish the fire immediately.
Vehicle Fire Suppression System Caters To:
- → Mining
- → Transportation
- → Aviation
- → Forestry
- → Metal processing
- → Agribusiness
- → Power generation/utilities
- → Waste processing
Automatic Fire Suppression and its Features
MLC is one of the reliable vehicle fire suppression system suppliers providing the best fire suppression services to varied clients. Our fire suppression equipment for vehicle fires that uses fire suppression chemicals to extinguish the fire efficiently. It is known as the best fire suppression system and appreciated due to the following list of features.
- → Easy installation directly inside engine compartments of vehicles
- → Early fire detection
- → Instant fire suppression capacity just moments after the fire began
- → Fast, effective fire suppression in a small, design-friendly footprint
- → Able to protect the engine compartment
- → Highly dependable with no electricity required
